How to connect your Sunmi Cloud Printer to Wifi?
Connect the printer to the internet with UTP cable.
Wait for the voice: 'LAN network connected'
Click 2 times fast the small reset button on the back of the printer. Wait for the voice 'Network self-checking'
A ticket will be printed, look for the IP-address.
Surf to the IP-address in your browser. Make sure your laptop is also connected to the same wifi signal of the router where the UTP cable is linked to.
Login to the administrator panel. (There is no password)
Go to 'Wi-Fi'
Click 'Configure SSID'
Fill in your Wifi Network Name and Wifi Network Password and hit 'OK'
Before you click 'save' remove '0.0.0.0' from the 'Netmask (Static)' field. Then press 'save'.
Now you can disconnect the LAN cable, turn off/on the printer.
Wait for the voice 'Wifi Connected'
Now your Sunmi Cloud Printer is able to work on Wifi.
Good luck printing!
How to connect your Sunmi Cloud Printer correctly in orderBilly backoffice?
To add your Sunmi Cloud Printer, go to Devices > Create a device > Sunmi order printer.
Device name: add a name to your printer, allowing you to easily find the printer for future settings changes.
Configuration:
External ID: add the serial number of the printer. This is a required field. You will find the serial number at the bottom of your printer
Receipt template: If you have created a specific template for this printer, you can select it here. Currently, only Billy staff can modify this for you, so don't hesitate to get in touch with us!
Ticket type:
Prep ticket: one ticket will be printed, with all the article lines on it, without prices.
Receipt: the ticket will also be showing the prices of the products.
Prep ticket per product: per product, one ticket will be printed, without prices.
Group items by category: group your items on the ticket by the category they belong too. On your ticket, you will now see a coke and a still water together, even when someone adds a different article to the basket in between. The order in which the client adds products to the basket will no longer determine in which order the article lines appear on the printed ticket.
Multi print count: print the ticket more than one time when receiving a new order.
Order status after print: default value is 2.
Sources: The toggle 'Only print orders placed on specific source devices' will only print orders when they linked to a specific kiosk, for example. When the toggle is off, the product will allow all source devices to send orders.
Menus: You can indicate you want to print only the orders of certain menus
Test print: allows you to perform a test print, to see if everything is set up correctly.