Follow these steps to configure your Newland FM3080 barcode scanner for use with orderBilly.

Normally the scanner is working out from the box.

If something is not working as expected, please follow the steps below.

For each step, simply scan the animated barcodes in the order shown.

💡 Tip: Each barcode is displayed for 2 seconds. Wait for your scanner to confirm the scan before continuing. When you see “the end”, that step is complete.

Reset the scanner to its factory settings.

Scan each barcode shown in the animation.

Configure the scanner to behave like a USB keyboard.

This allows scanned barcode data to be entered directly into the device connected to your scanner.

Configure the scanner to use the Belgian keyboard layout.

This ensures scanned characters are interpreted correctly.

Make sure the keyboard settings on your kiosk are also setup as Belgian keyboard.

Configure the scanner to automatically send an Enter keystroke after scanning a barcode.

This means you won’t need to manually press Enter after every scan.

Now configure the scanner’s performance and delay settings.

Scan only the barcodes of which delay you want to setup.

Configure the scanner’s Fast Mode settings.

Scan only the barcode with 'Fast Mode on' to turn on and vice versa.

Wait for “the end” before moving to the final step.

Try to put the scanner in Sense Mode to have better scanning results.

Once you see “the end”, your scanner configuration is complete. 🎉

After completing some of the steps, test the scanner.

If this works, your Newland FM3080 is ready to use with orderBilly.